Kimat 3 LED
The 3 LED module is part of Layad Circuits’ Kimat series of rapid prototyping products.
The 3 LED module is small compact module that
integrates 3 LED’s with the necessary resistors and
breadboard/Arduino friendly pin headers.
Application:
This module contains a very simple circuit – 3 standard
5mm LED’s with current limiting resistors. Simple things
may prove troublesome to build though when you have
to do it often or when your project is time critical. This
is especially true for something very useful as LED’s.
This is why we have this module. This has been used
extensively as an indicator from simple 3 channel digital
state tester to power indicators.
Wiring and Testing
You may always use connectors (or breadboard) for the
pins and connect them individually to whichever GPIO
or voltage source you want to use. For Arduino users, a
trick for avoiding the use of wires is to employ 1 digital
pin as a ground pin by setting it as an output and
initializing it to the low state. This will allow you to
insert the module into any 4 adjacent pins.
Click the link below for the user guide.